Maryland · Washington, DC · Northern Virginia

Garage Door Opener Repair & Installation

A garage door opener should make daily access simple, controlled, and predictable. When the opener stops responding, reverses before closing, makes unusual noise, strains against the door, loses remote connection, or can no longer move the door reliably, the problem may be in the operator—or somewhere else in the garage door system.

DMV Garage Door Repairs provides garage door opener diagnosis, repair, replacement, and installation for homeowners across Maryland, Washington, DC, and Northern Virginia. We inspect the opener together with the door itself because a motorized operator cannot correct a broken spring, loose cable, damaged roller, bent track, unbalanced door, or structural problem.

We are available 24/7 for garage door service.

Request Opener Service Speak With a Technician

Is the Opener Straining, the Door Crooked, or the Garage Door Stuck?

Stop pressing the wall button or remote if the opener is pulling against a door that is crooked, jammed, unusually heavy, off track, or moving unevenly.

The opener is designed to move a properly balanced door. It should not be used to force a mechanical failure.

Call (240) 932-9585 and tell us:

Whether the door is open, closed, or partly open
Whether the opener makes any sound
Whether the motor runs but the door does not move
Whether the door reverses
Whether the wall button works
Whether remotes or keypad work
Whether the safety-sensor lights are on
Whether a spring appears broken
Whether a cable is loose
Whether a roller is outside the track
Whether the door feels unusually heavy
Whether a vehicle is trapped inside

If the door is unstable or visibly damaged, keep people, pets, vehicles, and stored items away from the opening.

What a Garage Door Opener Actually Does

The garage door opener is the powered operator that moves the door after the spring system has balanced most of the door's weight.

A typical residential opener system may include:

Motor and drive assembly
Rail or track
Trolley or carriage
Door arm
Wall control
Remote controls
Wireless keypad
Photoelectric safety sensors
Travel and force settings
Limit or position controls
Light system
Emergency release
Logic board
Receiver
Battery backup on equipped models
Wi-Fi or smart-home features on equipped models

The opener is only one part of the complete garage door system.

Springs, cables, rollers, tracks, hinges, panels, and door balance directly affect how hard the opener must work.

Common Signs You Need Garage Door Opener Repair

The Garage Door Opener Does Nothing

If the opener is completely unresponsive, possible causes include no power, a tripped breaker, disconnected plug, failed wall control, logic-board problem, internal electrical failure, damaged wiring, failed motor, lock or vacation mode, or power surge damage. The door should also be checked to make sure a mechanical failure did not occur at the same time.

The Motor Runs but the Door Does Not Move

Possible causes include a disconnected trolley, worn internal gear, broken drive component, door arm problem, stripped carriage, door jam, broken spring, or the opener pulling against a mechanical failure. Do not repeatedly run the motor while the door remains stationary.

The Door Starts to Close and Reverses

Possible causes include safety-sensor obstruction, misaligned sensors, damaged sensor wiring, incorrect travel setting, excessive closing resistance, bent track, binding rollers, door imbalance, a bottom seal contacting an obstruction, or an operator control issue. A reversing door should be diagnosed rather than simply increasing force.

The Door Will Open but Not Close

This may involve safety sensors, sensor alignment, sensor wiring, wall-control behavior, travel settings, an obstruction, door binding, or a logic-board issue.

The Door Will Close but Not Open

Possible causes include a broken spring, excessive door weight, internal opener damage, worn gear, door binding, trolley problem, motor weakness, or a travel-control issue. A broken spring can make a door too heavy for the opener and can be mistaken for opener failure.

The Opener Is Much Louder Than Before

New grinding, rattling, humming, clicking, squealing, or vibration may come from worn gears, loose hardware, chain or belt problems, rail movement, motor bearings, trolley wear, door rollers, hinges, springs, or loose ceiling supports. The sound should be traced to the actual component.

The Opener Hums but Does Not Move

A humming operator may have an internal motor, capacitor, gear, trolley, or mechanical-load problem. Stop repeated attempts until the system is inspected.

The Remote Works Only From Very Close Range

Possible causes include a weak battery, antenna issue, receiver problem, interference, remote damage, programming issue, or logic-board problem.

The Wall Button Works but the Remote Does Not

This can indicate a remote battery, programming loss, receiver problem, lock mode, damaged remote, or radio-frequency interference.

The Remote Works but the Wall Control Does Not

Possible causes include wall-control failure, low-voltage wiring damage, loose connection, or a control-board issue.

The Keypad Stopped Working

Potential causes include battery failure, lost programming, incorrect PIN, damaged keypad, receiver problem, lock mode, or environmental damage.

The Door Stops Before Fully Opening

Possible causes include a travel setting, binding track, worn rollers, heavy or unbalanced door, spring problem, internal opener wear, or an obstruction.

The Door Does Not Fully Close

Possible causes include a travel or limit setting, sensor issue, floor obstruction, bottom seal resistance, track problem, door alignment, or an opener-control issue.

The Garage Door Opens by Itself

Possible causes may include a remote or wall-control malfunction, wiring issue, logic-board problem, stuck control button, programming problem, or another control device triggering the system. Unexpected operation should be investigated promptly.

The Opener Light Flashes or Error Indicator Appears

Many modern openers use diagnostic lights, display codes, or app notifications. The meaning depends on the exact model. Manufacturer documentation and system inspection may help identify the problem.

Is It Really the Opener?

This is one of the most important questions on the page.

Many calls described as “the opener is broken” are actually caused by the garage door itself.

Broken Spring

A broken spring can make the door too heavy for the opener. The motor may hum, move the door only a few inches, or stop under load.

See broken garage door spring repair.

Loose or Broken Cable

A cable problem can make the door lift unevenly or become crooked. The opener should not be used to pull an uneven door.

Worn or Seized Rollers

A damaged roller can increase resistance and make the opener sound strained.

Off-Track Door

An opener should never be used to force a door that has left the track.

See off-track garage door repair.

Bent or Damaged Panel

A distorted section can bind in the tracks or affect the opener attachment.

Garage Door Opener Safety Sensors

Most modern residential systems use photoelectric safety sensors near the bottom of the door opening.

They are designed to detect an obstruction in the closing path and are a critical part of safe operation.

Signs of a Sensor Problem

Door opens but will not close normally
Door reverses immediately
Sensor indicator light is off
Sensor light flickers
One sensor appears misaligned
Wiring is damaged
Sensor lens is dirty
Sensor bracket is bent
Door closes only through a special wall-control behavior on some systems

Common Causes of Sensor Problems

Object blocking the beam
Dirt or cobwebs
Misalignment
Loose bracket
Damaged low-voltage wire
Moisture
Impact
Sunlight interference in certain conditions
Failed sensor
Control-board issue

Do Not Bypass Safety Sensors

Do not permanently defeat, remove, tape over, or bypass safety devices to keep the opener operating. The underlying problem should be corrected.

Common Garage Door Opener Repairs

Repair depends on diagnosis and parts availability.

Remote and Keypad Programming

Programming may be needed after battery replacement, power loss, new remote purchase, keypad replacement, logic-board work, memory clearing, or a home ownership change.

Wall Control Repair

The wall control and low-voltage wiring can be tested when remote behavior differs from wall-button behavior.

Safety Sensor Repair

Service may include cleaning, alignment, bracket correction, wiring repair, sensor replacement, and testing closing behavior.

Drive System Repair

Depending on opener design, service may involve the belt, chain, trolley, carriage, sprocket, gear, or rail components. Not every damaged internal drive component is practical to repair on an older opener.

Logic Board or Receiver Diagnosis

Electronic faults may affect remotes, keypads, lights, travel control, motor commands, smart features, or sensor communication. Repair value depends on opener age, model, part availability, and overall condition.

Travel and Limit Adjustment

Travel settings determine where the door stops in the open and closed positions. Adjustment should be performed only after mechanical door problems have been ruled out.

Opener Reinforcement and Door Arm Problems

The door arm and operator bracket must be attached to a structurally sound top section with appropriate reinforcement. A damaged top panel should be repaired before the opener is allowed to keep pulling on it.

What Not to Do When the Garage Door Opener Fails

Do Not Keep Pressing the Button

Repeated cycling can worsen mechanical damage or overheat an already stressed operator.

Do Not Increase Force to Overcome Resistance

More force is not a repair for a bent track, broken spring, damaged roller, or unbalanced door.

Do Not Pull the Emergency Release on an Unstable Door

If the door is open, crooked, or has a broken spring, disconnecting the opener can allow unexpected movement.

Do Not Bypass the Safety Sensors

A closing problem should be diagnosed correctly.

Do Not Replace the Opener Before Checking Door Balance

A new opener can be damaged or perform poorly if the door itself is too heavy or binding.

Opener not working and you need the door back in service? Call (240) 932-9585 and describe what happens when you press the wall button or remote.

Request Opener Diagnosis

Garage Door Opener Repair vs. Replacement

A failed opener does not automatically need replacement.

The decision should consider age, repair cost, parts availability, features, reliability, door compatibility, and the condition of the garage door itself.

Repair May Make Sense When:

The opener is otherwise in good condition
The problem is isolated
Compatible parts are available
The motor and rail remain serviceable
The system meets the homeowner's needs
Safety devices can be restored correctly
Repair cost is reasonable compared with replacement

Replacement May Make More Sense When:

The opener has repeated failures
Critical parts are obsolete
The rail or drive system is heavily worn
The unit lacks features the homeowner now needs
The system is excessively noisy
Major electronic and mechanical repairs are both required
The opener is incompatible with the new garage door
The homeowner wants battery backup, quieter operation, smart access, or another meaningful upgrade

Do Not Replace a Working Opener Just Because It Is Older

Age is one factor, not the entire decision.

A reliable opener that operates a balanced door safely may continue to be serviceable.

The recommendation should be based on actual condition and homeowner needs.

Types of Garage Door Openers

Belt-Drive Garage Door Openers

Belt-drive systems use a reinforced belt to move the trolley.

Potential advantages: quieter operation, lower metal-on-metal drive noise, a good option for attached garages or bedrooms above the garage, and smooth travel when properly installed.

Important considerations: product quality varies, the door still needs correct balance, belt and trolley components can wear, and higher initial cost is common compared with basic chain-drive systems.

Chain-Drive Garage Door Openers

Chain-drive systems use a metal chain.

Potential advantages: proven design, widely available, suitable for many residential doors, and often available at multiple price levels.

Important considerations: more operating noise, chain tension and rail condition matter, and vibration may be more noticeable in attached living spaces.

Wall-Mount or Jackshaft Openers

Wall-mount openers are installed beside the torsion shaft instead of hanging from the ceiling.

Potential advantages: frees ceiling space, useful where overhead storage matters, clean installation appearance, and can work well with certain high-lift or specialty track configurations.

Important considerations: requires a compatible door and torsion setup, side clearance matters, electrical location matters, and door balance must be correct. Not appropriate for every garage.

Direct-Drive and Other Designs

Some manufacturers use proprietary direct-drive, screw-drive, or other operator designs. Repair and replacement decisions depend on the exact model and parts availability.

Belt Drive vs. Chain Drive

Category	Belt Drive	Chain Drive
Noise	Usually quieter.	Typically produces more mechanical sound.
Cost	May cost more depending on features and construction.	Basic models are often priced lower.
Maintenance	Both systems require correct installation, secure hardware, and a balanced door. Maintenance needs vary by manufacturer and model.
Best Use	Attractive for attached garages or living spaces above the garage.	A practical option where operating noise is less important.

Wall-Mount vs. Ceiling-Mount Opener

The right choice depends on garage construction and door hardware.

Ceiling-Mount Opener

Common advantages: familiar layout, works with many standard sectional doors, broad product selection, and a common replacement path for existing systems.

Wall-Mount Opener

Potential advantages: frees overhead ceiling area, reduces a long rail through the center of the garage, and may fit specific door and ceiling layouts better.

Important requirements may include: a compatible torsion shaft, correct side clearance, a suitable electrical outlet, proper door balance, and a compatible drum and track setup.

Smart Garage Door Openers

Smart features can allow a homeowner to monitor or control the garage door through a compatible app or connected platform.

Features vary by model and may include open/close status, remote control, activity history, user access, delivery access, alerts, scheduled closing, camera integration, and voice-assistant compatibility.

Before choosing a smart opener, consider Wi-Fi signal strength in the garage, app compatibility, subscription requirements for optional features, household access needs, privacy preferences, and long-term software support.

Smart Features Should Not Replace Mechanical Safety

An app cannot correct broken springs, loose cables, bent tracks, damaged rollers, poor balance, or failed safety sensors.

Mechanical condition still comes first.

Battery Backup

Battery backup is available on many modern opener systems.

It can provide limited operation during a power outage, depending on the model, battery condition, door balance, and manufacturer design.

A weak or unbalanced garage door can reduce reliable battery-backed operation.

Signs a Backup Battery May Need Attention

Battery warning
Beeping
Failure during outage
Battery age notification
Reduced backup performance

Follow the specific opener manufacturer's replacement guidance.

Garage Door Opener Installation

A good opener installation starts with the garage door.

The technician should confirm that the door is mechanically sound and appropriately balanced before the operator is installed.

Before Installation, We Evaluate:

Door width and height
Door weight and construction
Spring balance
Track condition
Roller condition
Top-section reinforcement
Ceiling height
Ceiling framing
Electrical outlet
Existing rail placement
Door travel
Headroom
Vehicle clearance
Storage interference
Wi-Fi needs
Wall-control location
Safety-sensor locations

Our Garage Door Opener Installation Process

Door and Opener Evaluation

We confirm:

Door moves correctly
Door is balanced
Tracks are aligned
Rollers move freely
Springs and cables are serviceable
Top section can accept the opener connection
Selected opener is appropriate for the system

Remove Existing Opener When Included

The old operator, rail, controls, and related hardware are removed as required by the project scope. Existing electrical and mounting conditions are inspected.

Install the Rail and Power Unit

The opener must be mounted securely and aligned with the door. Ceiling supports should be stable and appropriately positioned.

Connect the Door Arm

The opener arm must connect to a properly reinforced top section. The connection should allow correct door geometry through the full travel.

Install Wall Control and Safety Sensors

Components are positioned according to the selected system and manufacturer instructions. Wiring should be secured and protected from obvious damage.

Program Travel and Operating Settings

The opener is configured so the door:

Opens to the correct position
Closes to the correct position
Does not overtravel
Does not rely on excessive force
Responds correctly to controls

Program Remotes, Keypad, and Smart Features

When included, we can configure compatible:

Remotes
Keypad
Wall control
Vehicle integration
Smart app
Wi-Fi connection

Test Safety Functions

Testing may include:

Photoelectric sensor response
Reversal behavior
Wall control
Emergency release
Door balance
Full open/close cycle
Unusual noise
Secure closing

Homeowner Walkthrough

The homeowner should understand:

How to operate the opener
How to use remotes and keypad
How smart features work when included
How the emergency release works
What warning signs to report
Basic maintenance
Manufacturer documentation

Can the Existing Garage Door Opener Be Reused With a New Door?

Possibly.

When a new garage door is installed, the existing opener should be checked for reliability, rail length, door-height compatibility, motor condition, drive-system condition, safety-sensor operation, top-section attachment, smart-feature needs, and new door weight and balance.

Garage Door Opener Motor Size and Door Weight

Homeowners often focus on horsepower or horsepower-equivalent marketing.

The better approach is to match the opener to the actual door and manufacturer specifications.

Important factors include door size, door weight, insulation, material, single vs. double door, spring balance, track configuration, cycle frequency, and opener design.

A properly balanced door should not require the opener to lift its full dead weight.

Garage Door Opener Installation Cost Factors

Cost may vary based on:

Opener type
Belt, chain, wall-mount, or specialty design
Smart features
Battery backup
Camera features
Rail length
Door height
Single or double door
Existing opener removal
New ceiling supports
Electrical conditions
Wall-control wiring
Sensor wiring
Keypad
Remotes
Vehicle programming
Door reinforcement
Door repair required before installation

Common Garage Door Opener Installation Mistakes

Installing an Opener on an Unbalanced Door

This forces the operator to do work the spring system should be doing.

Using an Under-Reinforced Top Section

The opener bracket can pull through or deform the top panel.

Mounting the Rail Out of Alignment

Incorrect geometry can affect travel and door-arm movement.

Using Excessive Force Settings

Force should not be used to hide mechanical resistance.

Poor Safety-Sensor Positioning

Sensors must remain aligned and protected from frequent impact.

Ignoring Ceiling Support

A loose opener frame can create vibration and movement.

Skipping Final Balance Testing

The opener can appear to work while the underlying door is too heavy or poorly balanced.

Choosing Features Without Checking Compatibility

Smart controls, battery backup, vehicle integration, and wall-mount designs have model-specific requirements.

Common Homeowner Opener Mistakes

Repeatedly Pressing the Remote When the Door Is Jammed

This can place additional stress on the operator and door.

Assuming Every Problem Is Electrical

A broken spring or mechanical bind can look like opener failure.

Pulling the Emergency Release Without Checking Door Stability

A heavy or open door can move unexpectedly after disconnection.

Replacing Remotes Before Testing the Wall Control

The pattern of which controls work can help isolate the problem.

Ignoring Sensor Alignment

A small bump from a trash can, broom, bicycle, or stored item can move a sensor bracket.

Buying a New Opener Before Measuring the Door and Garage

Door height, rail length, headroom, side room, ceiling storage, and outlet location can affect the installation.

Homeowner Garage Door Opener Checklist

Before Calling, Check Safely Whether:

The opener is plugged in
The breaker is on
The wall control responds
The remote battery is fresh
Lock or vacation mode is enabled
Sensor lenses are visibly blocked
Sensor brackets appear obviously moved
The door is crooked
A spring appears broken
A cable is loose
A roller is off track
The opener makes a sound
The motor runs without door movement
The door reverses
The problem affects one control or every control

Stop Using the Opener When:

The door is crooked
The door is off track
A spring is broken
A cable is loose
The door is unusually heavy
The opener is pulling on a bent panel
The motor is grinding or smoking
Electrical wiring is visibly damaged
The door drops or moves unpredictably
Safety devices are not functioning correctly

Trapped Vehicle

Is Your Car Trapped Because the Opener Will Not Lift the Door?

The opener may not be the only problem. Call (240) 932-9585 and tell us whether the motor runs, whether the spring appears broken, and whether the door is level.

Request the Earliest Available Appointment Speak With a Technician

Preventive Garage Door Opener Maintenance

The opener and garage door should be treated as one system.

Preventive attention can identify small problems before the operator begins straining or the door stops moving reliably.

Listen for Changes

Report new grinding, rattling, humming, clicking, squealing, vibration, or slow movement.

Watch the Door, Not Only the Motor

Look for uneven lifting, jerking, track rubbing, shaking, delayed movement, door sections flexing, cable problems, or roller binding.

Keep Sensor Areas Clear

Avoid placing storage bins, trash cans, bicycles, tools, boxes, or lawn equipment where they can block or strike safety sensors.

Replace Remote and Keypad Batteries When Needed

Weak batteries can create intermittent control problems.

Do Not Use the Opener as a Door Repair Tool

If the door feels heavy or moves poorly when disconnected, the mechanical system needs attention.

Local Garage Door Opener Service Across the DMV Region

DMV Garage Door Repairs provides garage door opener repair and installation across Maryland, Washington, DC, and Northern Virginia.

Homes throughout the region include attached garages, townhomes, detached garages, older properties, new construction, and homes with living space directly above the garage. Those conditions can affect opener selection.

For example, an attached garage may make operating noise more important, a bedroom above the garage may make a quieter belt-drive system more attractive, a low ceiling may affect rail and opener placement, overhead storage may make wall-mount options worth evaluating, older garages may need updated mounting support or electrical review, townhouse garages may have tight space around tracks and storage, and a new insulated double door may require reevaluation of an older opener.

When requesting service, provide:

Full property address
Photo of the opener
Photo of the manufacturer/model label
Photo of the full garage door
Whether the wall control works
Whether remotes work
Whether the keypad works
Whether the opener makes noise
Whether the motor runs
Whether the door reverses
Whether the safety-sensor lights are on
Whether the spring appears broken
Whether the door is crooked or heavy
Whether you are considering repair or replacement

See the full areas we serve across the DMV region.

Why Homeowners Choose DMV Garage Door Repairs

An opener service call should determine whether the problem is in the operator, controls, safety devices, or the garage door itself.

We Inspect the Door Before Blaming the Motor

Broken springs, cables, rollers, tracks, and panels can all create opener symptoms.

We Compare Repair and Replacement

When both are reasonable, the homeowner should understand the difference in cost, reliability, features, and long-term value.

We Check Door Balance

A properly balanced door protects the opener from unnecessary strain.

We Consider the Garage Layout

Noise, ceiling storage, door height, electrical access, living space, and smart-home needs can affect opener selection.

We Test the Complete System

The final test should include door travel, opener response, safety sensors, controls, secure closing, and abnormal noise.

We Avoid Unsupported Claims

We don't publish “all brands,” “same-day installation,” “lifetime warranty,” “manufacturer certified,” “licensed and insured,” or guaranteed response times unless each claim is accurate and verifiable.

Frequently Asked Questions About Garage Door Opener Repair and Installation

Why Is My Garage Door Opener Not Working?

Possible causes include power loss, a wall-control issue, a remote issue, safety sensors, the logic board, the motor, the drive system, a broken spring, a cable problem, door binding, or travel settings. A complete diagnosis should check both the opener and the door.

Why Does My Garage Door Open but Not Close?

Safety sensors are a common reason, but they are not the only reason. Sensor alignment, wiring, travel settings, obstructions, binding, or operator faults may also be involved.

Why Does the Garage Door Reverse Before Closing?

Possible causes include sensor interruption, misalignment, excessive closing resistance, travel setting, track problem, roller problem, bottom obstruction, or door imbalance.

Why Does the Opener Run but the Door Does Not Move?

The trolley may be disconnected, the drive system may be damaged, or the door may have a mechanical failure such as a broken spring.

Why Does My Opener Only Hum?

A humming operator may have a motor, capacitor, gear, drive, trolley, or excessive-load problem. Stop repeated attempts and arrange inspection.

Why Does the Wall Button Work but Not the Remote?

Check the remote battery and lock mode first. Programming, receiver, remote, or logic-board problems may also be involved.

Why Does the Remote Work but the Wall Button Does Not?

The wall control, wiring, connection, or control board may need diagnosis.

Can You Repair Garage Door Safety Sensors?

Sensor problems may be repairable through cleaning, alignment, bracket correction, wiring repair, or sensor replacement depending on the cause.

Should I Repair or Replace My Garage Door Opener?

Repair may be reasonable when the problem is isolated and parts are available. Replacement may be more practical when major components are worn, repairs are recurring, the unit is obsolete, or the homeowner wants a meaningful feature upgrade.

What Is Better: Belt Drive or Chain Drive?

Belt drive is usually quieter. Chain drive is a practical and widely used option. The best choice depends on the garage, door, budget, noise sensitivity, and desired features.

Is a Wall-Mount Garage Door Opener Better?

It can be a good choice for certain garages, especially when ceiling space matters. It requires a compatible door, torsion setup, side clearance, electrical location, and correct balance.

Do I Need Battery Backup?

That depends on local needs and homeowner preference. Battery backup can provide limited operation during power outages on compatible systems.

Can You Add a Smart Garage Door Opener?

Smart features may be available through a new compatible opener or, in some cases, compatible accessories. Compatibility should be verified for the exact system.

Can You Program My Remote or Keypad?

Yes, programming may be part of opener service when the controls and opener are compatible and functional.

Can You Program My Car to the Garage Door Opener?

Some vehicle-integrated systems can be programmed to compatible openers. Compatibility and programming steps vary by vehicle and opener.

Can I Use My Existing Opener With a New Garage Door?

Possibly. The opener should be inspected for compatibility, reliability, rail length, safety devices, and the weight and balance of the new door.

Can an Opener Lift a Door With a Broken Spring?

It should not be used to do so. A broken spring can make the door extremely heavy and can damage the opener or create unsafe movement.

Can a Bad Roller Damage the Opener?

Yes. A seized or binding roller can increase resistance and make the operator work harder.

Can an Off-Track Door Damage the Opener?

Yes. The opener should not be used to pull a crooked or off-track door.

Why Is My New Opener Still Loud?

Noise may come from door rollers, hinges, springs, tracks, ceiling structure, mounting hardware, or door vibration. Replacing the motor does not eliminate every source of noise.

How Long Does Garage Door Opener Installation Take?

Installation time depends on the garage, door, old equipment, rail length, wiring, mounting, programming, and any door repairs required.

What Affects Garage Door Opener Installation Price?

Price can depend on opener type, drive type, battery backup, smart features, rail length, door height, remotes, keypad, wiring, existing opener removal, door reinforcement, and mechanical repair needed first.

Do You Repair Commercial Operators?

Commercial operator service may be available depending on the door, operator type, voltage, controls, access, equipment, and parts.

What Should I Send Before the Appointment?

Send your property address, a full-door photo, an opener photo, the model label, wall-control behavior, remote behavior, sensor-light status, a video of the problem when safe, whether a spring is broken, whether the door is crooked, and whether the car is trapped.

Related Garage Door Services

Opener problems often connect to these other repairs. Links activate as each page is published.

View All Services →

Opener Repair & Installation

Need Garage Door Opener Repair or a New Opener?

A garage door opener should move a properly balanced door smoothly and predictably. If the opener is unresponsive, noisy, reversing, straining, or no longer reliable, we inspect both the operator and the garage door before recommending repair or replacement. For garage door opener repair and installation across Maryland, Washington, DC, and Northern Virginia, contact DMV Garage Door Repairs.

(240) 932-9585 Request Opener Service

Have photos of the opener, model label, garage door, wall control, and safety sensors? Include them with your request when possible. A short video of the problem can also be useful when it can be recorded safely.